b'BUILDING CODEFigure 3: Tables listed by system acronyms include buttons with drop-down lists that allow readers a sneak peak at the assembly and its constituent materials.RPMTestedAssemblyreportlibrary,ensure enough of a safety margin foridentify the methods used to secure each located in the Wind Uplift Resource Centrethedesign.Designersshouldavoidlayer of materials in the assembly and on the RPM main page (Figure 2). Thechoosing an exact match between thelist possible substitute materials. Actual libraryorganizestestreportsbythehighest Specified Wind Load value and thetest results are reduced to account for three principal securement options andDUR on a test report, but if no betterpotentialextremevariations,suchas displaysthemineasy-to-readtables:options are available, a match betweengusts or wind shifts. 7AARS, PARS and MARS. Readers canthe two should be used with caution. Occasionally,manufacturerstest sort through the catalogue of reports byTestreportsmaynotalllookthevarious patterns of securement. These using buttons that display pop-out lists, without having to read through multiplesamebecauseofvariationinformat- willusuallybereportedasdifferent reports (Figure 3). Choose a test reportting, but all show the makeup of thesystems,atermthatshouldnotbe withaDURthatishigherthantheroof assembly, identify the DUR valuesconfused with roof system. Some reports greatestSpecifiedWindLoadvaluetoderived at the completion of the test,listthreeorfoursecurementsystemswww.rcabc.org l23'