b'CLASS A ROOFSClass A requirements sit at the intersection of the building code and the fire code, and understanding the distinction between the two is essential.suitable listed assembly is not available, contact manufacturers that supply your region or with whom you have estab-lishedrelationshipsandrequestdocu-mentation showing Class A compliance for the proposed configuration. Where an assembly is supported by test reports ratherthanaformallisting,ensure thereportsclearlyidentifythetested Serving Metro Vancouver for 124 years! build-up (including deck, underlayments, Strata Re-roofing Specialists coverboards/insulationandattach-ment method) and make them part of Roofing & Gutters the project record and submittal package so the installed assembly can be verified 604.370.6288against the tested configuration.www.crownroofingltd.comFIRE CODE VS. BUILDING CODE: #118-11860 HammerSmith Way, Richmond, BCV7A 5G1 WHERE ROOFING ACTUALLY SITSClass A requirements sit at the intersec-tion of the building code and the fire code, and understanding the distinction between the two is essential.The building code governs building designandconstructionatthetime ofconstruction,addressingmaterial combustibility,structuralattachment, energyperformanceanddurability. Roong solutions, whenClass A appears where roof coverings and where you need them. or assemblies must meet recognized fire test standards. The fire code, by contrast, With our nationwide network, count on fast,is primarily concerned with fire risk, fire reliable delivery anywhere in Canada. spread and exposure. Acommonmisconceptionisthat compliancewithonecodeautomati-Get started with QXO callysatisfiestheother.Inpractice,a roof assembly may meet building code requirementsyetstillbequestioned Serving contractors across British Columbia underthefirecodeifexteriorfire Surrey | Burnaby and more performanceisunclear.Conversely,a Class A assembly may perform well in fire testing but still fail to meet building 16 lROOFINGBClSPRING 2026'